|
|
19.01.2018
Uzbekistan Marking / Uzbekistan certificate of conformity /Uzbekistan certification
41 Based on the issued certificate of conformity of Uzbekistan, taking into account the
established certification scheme the agreement on granting to the applicant the right to apply
the certificate of conformity and use of the sign of conformity is concluded. In this agreement,
the methods of marking the certified products with the conformity mark and inspection
inspection conditions must be stipulated.
42. Certified serially produced products (packaging, packaging and accompanying
documentation) are marked with a mark of conformity under the responsibility of the
manufacturer.
43. The manufacturer's implementation of a part of the certified products may be accompanied
by a copy of the certificate of conformity certified by the signature and seal of the holder of the
original of the certificate or the body that issued the certificate or the notary body.
Copies issued to the original holder of the certificate are registered in accordance with the
shipping documentation for the products. On each copy is indicated its registration number, the
number of products sold.
44. Products manufactured during the validity period of the certificate of conformity are
considered to be certified and not re-certified. Confirmation of product certification is the sign
of conformity and the date of manufacture in the operating and accompanying documentation.
45. The applicant has the right to submit an application to the OS with the purpose of re-
certification, not less than one month before the end of the validity period of the certificate of
conformity for the products. In this case, the OS can change the certification scheme, taking into
account the results of inspection control.
46. In case of planned amendments to the design (composition) of the product or the technology
of its production, which may affect the characteristics of the products to be certified, the
manufacturer must notify the OS, which decides whether to carry out corrective measures.
47. The OS issuing a certificate of conformity for serially produced products shall conduct
inspection inspection of certified products at least once a year to confirm its compliance with the
requirements established for certification. At inspection control, depending on the certification
scheme, product tests and / or production surveys are conducted.
48. Based on the results of the inspection control, the validity of the conformity certificate and
the use of the conformity mark can be confirmed, suspended or canceled.
49. The scope, content and procedure for carrying out inspection control of certified products is
established in the rules for conducting inspection inspection
Schematic
|
Testing in
accredited testing
laboratories and
other ways of
demonstrating
compliance
|
Examination of production or evaluation of the management system
|
Inspection
inspection of
certified products
(management
systems,
production)
|
1 |
Type testing |
- |
- |
2 |
Type testing |
- |
Testing of samples
taken in the sphere
of trade (by the
consumer)
|
3 |
Type testing |
Inspection of production |
Test samples taken
from the
manufacturer.
Inspection of
production
|
4 |
Type testing |
Inspection of production |
Testing of samples
taken both from the
sphere of trade
(from the
consumer) and
from the production
|
5 |
Type testing |
Examination of production or evaluation of the management system |
Testing of samples
and evaluation of
the quality system
(production survey)
|
6th |
- |
Evaluation of the management system |
Assessment of the
state of the
management
system
|
7th |
Test of the party |
- |
-
|
8 |
Test each sample |
- |
-
|
9 |
Consideration of
the declaration of
conformity with the
attached documents |
- |
-
|
50. The OS shall inform the manufacturer and the NSO of the suspension or revocation of the
certificate and the right of use by the applicant of the conformity mark. The NSO determines the
need to inform the relevant government bodies and the mass media about the revoked
certificates.
60. Products certified according to Schemes Nos. 3, 4, 5, 7, 8, 9 may be marked with a
conformity mark in the established order
|

|
|